Axial Displacement Distribution Of Truss Element For P 18

Figure (5.78): Axial displacement distribution in truss element for P-18-FEM results at pre-cracking, cracking, post-cracking, failure stage 5.5.5.1. Steel contribution in tension stiffening of FBLWC (150x150) mm: The tensile force transferred from the steel bar through the bond to the concrete is illustrated and compared for difference reinforcement ratio (Ï  = 0. 5%, 0.89% and 1.12% for steel 12 mm, 16 mm and 18 mm) in figure (5.79) and table (5.17). Before first crack accured (Pre-cracking stage), the precentage of tensile force transferred from the steel bar to the concrete accounts is about 8%, 13% and 16%. Aftere first crack accured (cracking stage), the precentage of tensile force transferred from the steel bar to the concrete is about 53%, 60% and 72%. During Post-cracking stage almost all the tensile force is carried by the steel bar 82%, 89% and 90% for P-12- FEM, P-16-FEM and P-18-FEM respectivily. % Steel contribution in tension stiffening of FBLWC Steel diameter in mm Steel 12 mm Steel 16 mm Steel 18 mm Pre-cracking 8% 13% 16% cracking 53% 60% 72% Post-cracking 82% 89% 90% Table (5.17): % Steel contribution in tension stiffening of 150x150 mm FBLWC prism Figure (5.79): % Steel contribution in tension stiffening of 150x150 mm FBLWC prism The difference between the bare steel response and actual RC tie response was tension stiffening effect. The shaded area represents the concrete contribution in the pre-cracking and the post-cracking ranges. At the given load PShow MoreRelatedModeling Of Engineering And Biomedical Sciences9738 Words   |  39 Pagesmade it possible to study structural properties of these nanofillers in atomistic state. These atomistic simulations are emerging as viable alternatives to time consuming and costly experimental means. Keywords: Boron nitride; nanofillers; finite element; density functional theory; molecular dynamics; Tersoff potential; hybrid nanostructures 1.0 Introduction Boron nitride (BN) is a lab-grown binary compound consisting of equal number of boron (B) and nitrogen (N) atoms. BN crystallizes either asRead MorePublic Fe Reference Handbook.Pdf46179 Words   |  185 Pages7% VI. Engineering Economics 8% VII. Engineering Mechanics (Statics and Dynamics) A. Statics 10% 6. Area moments of inertia 3. Mass moments of inertia a. particles a. particles VIII. Strength of Materials 7% 1. axial loads 3. torsion 2 EXAM SPECIFICATIONS—MORNING IX. Material Properties A. Properties 2. electrical 7% X. Fluid Mechanics 7% XI. Electricity and Magnetism 9% XII. Thermodynamics 7% I. Properties of: Read More_x000C_Formwork for Concrete Structures77423 Words   |  310 Pages . . . . . . . . . . . . . . . . . Tables of Equations for Calculating Allowable Span Lengths for Wood Beams and Plywood Sheathing . . . . . . . . . . . . . . . . . . . . . . . . . Compression Stresses and Loads on Vertical Shores . . . . Example 5-18 . . . . . . . . . . . . . . . . . . . . . . . . . . . Table for Allowable Loads on Wood Shores . . . . . . . Bearing Stresses Perpendicular to Grain ......... Design of Forms for a Concrete Wall . . . . . . . . . . . . . Lateral Pressure of Concrete

Life in the 1920s in Melbourne was much different than the years before Free Essays

There were drastic changes in Melbourne and also the world. Several changes made were that there is more ways for people to entertain themselves, women started to wear differently, also the form of transport was different. People in the 1920’s had many ways to entertain themselves. We will write a custom essay sample on Life in the 1920s in Melbourne was much different than the years before or any similar topic only for you Order Now Several ways they entertained themselves was by watched the football (which was called the VFL because it was only Victorian teams), going to the movies and watching the Melbourne Cup. The VFL is like AFL today but in the 1920’s it wasn’t Australia wide. Some of the teams that played were Collingwood, Carlton, Geelong, Essendon, South Melbourne, Richmond, St Kilda, Fitzroy and Melbourne. In the 1920’s Richmond won the Grand Final that year, Collingwood were the runners up that year. Collingwood lost by 17 points to a crowd of 53,908. The best player during this time was Roy Cazaly; George Bayliss was the leading goal scorer in 1920. Cinemas in Melbourne during the 1920s were in black and white. There was also no sound that was made by the actors. The only sound that they heard was from a piano player that on the side of the screen and played music when it was the right time. Many of the movies seen in the cinemas were from America but there were a couple that were made in Australia. One of the movies shown in cinemas during the 1920’s was Soldiers of the Cross; the main characters in this movie were Beatrice Day, Harold Graham. Also in the 1920’s the Melbourne Cup was won by a horse named Poitrel, the jokey that was riding him was K.Bracken and the trainer was H.J.Robinson. Erasmus came second and queen comedy came third. Most of the transport in the 1920’s was by trains and cars. The trains they had been stream trains which were loud and let out a lot of smoke from their chimneys. Trains only travelled at a few kilometres an hour but were gradually changed to 30km/h during the 1920’s. Flinders Station existed during that time and is still used today. Many Australians had cars, it was said that about 500 000 cars were owned in 1929 by Australians. Australia was ranked in the top five nations that owned cars. Most of the cars in Australia were imported from Europe and America but also some were made here in Australia. Most of the cars were run on steam but they began to move towards the petrol cars. Plans were used as a source of transport to go to other countries. Throughout the late 1920’s electric trams started to appear in Melbourne Fashion for men and women changed enormously clean-shaven chins became more fashionable than beards and knee-length skirts were high fashion for women. Coats and stoles became fashionable in Melbourne. The ideas of these types of clothing came from the Chinese, Egyptian and the Japanese. Coats were transformed into a more casual which were made from lightweight silks and local fur. They also had coats that had a sensual combination of Chinese, Egyptian and Australian influences. How to cite Life in the 1920s in Melbourne was much different than the years before, Essays

Patient Record Management System free essay sample

The vast development of technology is the evident in hospitals in other countries as they have developed and implemented different forms of Patient Record Management System making practitioners and health professionals’ work easier than the manual way of gathering patient’s record that the hospitals had before. In Philippines, only a few hospitals (Saint Lukes Medical Center, Makati Medical City and Asian Hospital and Medical Center) have implemented a fully Electronic Medical Record which includes all inpatient and outpatient healthcare information. The goal of the hospital is to share information with all the national hospitals and public healthcare facilities and at present they can share data with one branch of the hospital. Some hospitals still use the manual method which is time and energy consuming but why it is that only few hospitals in the Philippines, being a newly industrialized country may have a factor on why implementing a PRMS is impossible. We will write a custom essay sample on Patient Record Management System or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page The possible reasons could be insufficient funds, lack of technical expertise and computer skills and the lack of data processing facilities. In addition, the resistance of medical practitioners and health professionals generally to change from manual to electronic documentation may be a problem. Most health administrators and information managers are used to the old system and have this fear that it may take time to change or at least modify some behaviour and attitudes. The reason for wanting to change to an electronic system is important. Most health administrators and information managers expect to move from a paper to paperless environment. This is a major step to help health institutions and the environment at the same time. By having an electronic system, practitioners could improve the accuracy and quality of data recorded in a health record, enhance practitioners’ access to a patient’s record, enabling it to be shared at present and also for the future use, it could also improve the quality of care because of health information that a patient need can be immediately available all the time. At present, people rely on the information from what is electronically made since it can easily be viewed. In the modern world, communication is vital within our lifestyle. With the advent of information and communication provided within a medical institution, practitioners together with their patients within the vicinity of Baguio may use the information easily to increase good organization. Patient Record Management System may provide both useful information with the Doctor and Patient alike, providing and improving easy Doctor-Patient communication. In the advancement of technology, electronic medical records are now growing more popularity today. As stated in the definition on wikipedia. rg about Electronic Medical Records, these are a computerized medical record that is created in an organization that can deliver care such as hospital or physician’s office. Electronic medical records are intended to be a part of a local stand-alone health information system that allow storage, retrieval and modification of records (retrieved from: Wikipedia. com, November 2011. en. wikipedia. org/wiki/ Electronic_health_record. Article form: http://www. prov idersedge. com/ehdocs/ehr _articles/Electronic_Patient_Records-EMRs_and_EHRs. pdf). These are medical records of patients that are encoded into the computer system of an organization for the information dissemination of medical practitioners in a particular organization such as hospitals, clinics and the like. In the global scenario, in an article by Steenhuysen J. (March 2009), the United States has less than 2 percent of U. S. hospitals that have completely accepted a fully functional electronic medical records. With U. S. President Barrack Obama has made electronic medical records a central piece of his plan to cut costs out of U. S. healthcare system that consistently ranks lower in quality measures than other rich countries. The U. S. President also allotted $19 billion to push into the increase the use of information technology in healthcare. The numbers of without electronic medical records are relatively high compared to those organizations that have adopted Electronic Medical Records. Starfield, B. (1991) postulates that Primary Care in the United States is critical to the provision of giving excellent medical care. From the research in the year 1996, the Institute of Medicine report defined primary care as the provision of integrated, accessible health care services by clinicians accountable for addressing most personal health care needs, developing a sustained partnership with patients, and practicing in the context of family and community. These makes more people to receive primary care than in other clinics. These clinics have adopted the innovations of information technology giving more value to the primary care in other clinics. These clinics have adopted the innovations on information technology giving more value to the primary care of their patients. Thus obviously electronic medical records in the clinic are to be present for the ease of accessibility, storage, retrieval and modification of medical records. However, in a smaller scale of health care system. Where Everyone, being succeptible to disease needs to prioritize on prevention in odres to additional expenses on health care. This visiting the doctors clinic today is the most effecient and inexpensivr way to prevent diseases. Offering various diagnosis, vaccinations and maintenance drugs. With todays population, more patients visit the doctors clinic and health records management poses as the most time consuming activity. As keeping numerous pages on file cases and searching this file cases one by one when a patient arrives eats most of the time that could have spent treating another patient. With all of the mentioned cases which inpact the number of patients diagnosed per day. The researchers agreed to conduct a study for Dr. Nelia Bacay’s clinic at SLU hospital of the Sacred Heart, annex. The researchers will try to find ways and practices to lighten up workload and minimize time consumed by developing a system. Statement of the Problem The main objective of the study is to design a Patient Record Management System for Dr. Nelia Bacay in which seeks to answer the following questions: 1. What processes are involved within the practitioners’ medical records of their patients? 2. What difficulties are encountered regarding the processes involved with the medical records? 3. What features regarding the medical records should be incorporated with the proposed Patient Record Management for Dr. Renato Manalo to their current system? Objective of the Study The main objective of the study is to design a Patient Records Management System for Dr. Nelia Bacay that shall lighten up workload and minimize time consumed on operation. The researchers intend to achieve the following: 1. To identify the current standard operating procedure in diagnosing patients. 2. To enumerate and discuss the most tiny consuming fact in the process. 3. To design a Patient Record Management that facilitates a quick and easy way to access and view patients profile. Significance of the Study This study is important in terms of advantages or benefits that would be gained by the following entities: To the Practitioners: The Practitioners will have the main importance of the study because of its increased number of patients and services rendered. More patients are inclined to avail of medical services. This also makes the communication between co-doctors of the same field. To the patients: The best advantage of having a Patient Record Management System is for them to have an ease to research about the Doctors’ profile and their accessibility through the use of PRMS. Just by a series of clicks and filling out necessary information, an appointment can be made. To the Researchers: The development of a PRMS makes the researchers to be more aware and knowledgeable of the future trend in information and technology specifically on Medical Informatics. Furthermore, by developing a system, programming skills of the researchers are improved. To future researchers: This study can be a reference and guide to other researchers who aim to develop a Patient Record Management System in the future that can be applied to other fields of interest such as hotels, restaurants, shops and alsp other fields of medical profession. Scope and Delimitation of the Study In improving the quality of services in an organization or establishment, we make look into other options such as hiring new personnel to increase work capacity, or procuring equipmentto lessen work and human error, or to create a more stable and reliable system may it be manual or computer oriented. In solving this matter, we could consider in the combination of the available options within our grasp. To further optimize the production in our establishment, the company could combine the options of having new equipment and creating a new system or updating the existing one. In putting these two options together, it will provide a more stable, reliable and efficient system to be used in daily transactions. Our project aims to proceed in updating the pre-existing system in the establishment. Changing the format from a manual type to a computer oriented information system. Reconfiguring the old system aims that customers and employees have a more convenient. With the project be finished, the company will have a smoother flow of work, lessened human error, improved time in finishing certain processes and as a total, a very significant increase in productivity and creating a reliable Patient Record System.

Free Essays on Prosperity And Depression

The good economic times of the 1920’s and the bad economic times if the 1930’s. The New Deal permanently increases the role of government in our lives. As the WWI end in 1918 and we failed to join the League of Nation in 1920. Also Harding was elected for president. This time was the post war depression and many social changes were made at this time. During this era, it was a time of prosperity changes on America or known at the roaring 20’s. Some of the social changes are: revolt in moral and manners changes for women (new industries)-behavior and appearance, home appliances, auto, airplane, radio, fads, sports, prohibition or also as stop the sell of alcohol-organized crime, big time movies, jazz, and Harlem Renaissance or as a rebirth of African American’s culture. Also in the 1920’s America return to normalcy or as return to the old ways. Then in 1923’s, President Harding dies. He was a horrible president and let big businesses ru n the country. During that period, the scandals with Harding, The Red Scare with communism coming to America, immigration restriction as in decreasing the number of immigrant going to this country and the Ku Klux Klan which is a white group with racial prejudice against other races. Then in 1925’s the Scope Trail. It was about this professor who teaches evolution in school and he was charge guilty for it. This was the biggest trial at the time. In 1927’s, Lindberg Flew across the Atlantic Ocean. He did this because it was a competition to see the first Solo man to fly across the ocean. He did this for money, not for fame. During the same year, the stock market was booming because new industries lead to overproduction so the prices are low and affordable. Then easy credit and advertising lead to overspending. After one year, Hoover is elected for president. After the second year of Hoover presidency, the stock market crashes in 1929’s. Then the depres sion begin or as bad... Free Essays on Prosperity And Depression Free Essays on Prosperity And Depression The good economic times of the 1920’s and the bad economic times if the 1930’s. The New Deal permanently increases the role of government in our lives. As the WWI end in 1918 and we failed to join the League of Nation in 1920. Also Harding was elected for president. This time was the post war depression and many social changes were made at this time. During this era, it was a time of prosperity changes on America or known at the roaring 20’s. Some of the social changes are: revolt in moral and manners changes for women (new industries)-behavior and appearance, home appliances, auto, airplane, radio, fads, sports, prohibition or also as stop the sell of alcohol-organized crime, big time movies, jazz, and Harlem Renaissance or as a rebirth of African American’s culture. Also in the 1920’s America return to normalcy or as return to the old ways. Then in 1923’s, President Harding dies. He was a horrible president and let big businesses ru n the country. During that period, the scandals with Harding, The Red Scare with communism coming to America, immigration restriction as in decreasing the number of immigrant going to this country and the Ku Klux Klan which is a white group with racial prejudice against other races. Then in 1925’s the Scope Trail. It was about this professor who teaches evolution in school and he was charge guilty for it. This was the biggest trial at the time. In 1927’s, Lindberg Flew across the Atlantic Ocean. He did this because it was a competition to see the first Solo man to fly across the ocean. He did this for money, not for fame. During the same year, the stock market was booming because new industries lead to overproduction so the prices are low and affordable. Then easy credit and advertising lead to overspending. After one year, Hoover is elected for president. After the second year of Hoover presidency, the stock market crashes in 1929’s. Then the depres sion begin or as bad...

Understanding and Using Loops in Delphi Programming

Understanding and Using Loops in Delphi Programming The loop is a common element in all programming languages. Delphi has three control structures that execute blocks of code repeatedly: for, repeat ... until and while ... do. The FOR loop Suppose we need to repeat an operation a fixed number of times. // show 1,2,3,4,5 message boxesvar j: integer;beginfor j : 1 to 5 dobeginShowMessage(Box: IntToStr(j)) ;end;end; The value of a control variable (j), which is really just a counter, determines how many times a for statement runs. The keyword for sets up a counter. In the preceding example, the starting value for the counter is set to 1. The ending value is set to 5.When the for statement begins running the counter variable is set to the starting value. Delphi than checks whether the value for the counter is less than the ending value. If the value is greater, nothing is done (program execution jumps to the line of code immediately following the for loop code block). If the starting value is less than the ending value, the body of the loop is executed (here: the message box is displayed). Finally, Delphi adds 1 to the counter and starts the process again. Sometimes it is necessary to count backward. The downto keyword specifies that the value of a counter should be decremented by one each time the loop executes (it is not possible to specify an increment / decrement other than one). An example of a for loop that counts backward. var j: integer;beginfor j : 5 downto 1 dobeginShowMessage(T minus IntToStr(j) seconds) ;end;ShowMessage(For sequence executed!) ;end; Note: its important that you never change the value of the control variable in the middle of the loop. Doing so will cause errors. Nested FOR loops Writing a for loop within another for loop (nesting loops) is very useful when you want to fill / display data in a table or a grid. var k,j: integer;begin//this double loop is executed 4x416 timesfor k: 1 to 4 dofor j: 4 downto 1 doShowMessage(Box: IntToStr(k) , IntToStr(j)) ;end; The rule for nesting for-next loops is simple: the inner loop (j counter) must be completed before the next statement for the outer loop is encountered (k counter). We can have triply or quadruply nested loops, or even more. Note: Generally, the begin and end keywords are not strictly required, as you can see. If begin and end are not used, the statement immediately following the for statement is considered the body of the loop. The FOR-IN loop If you have Delphi 2005 or any newer version, you can use the new for-element-in-collection style iteration over containers. The following example demonstrates iteration over string expressions: for each char in string check if the character is either a or e or i. consts About Delphi Programming;varc : char;beginfor c in s dobeginif c in [a,e,i] thenbegin// do somethingend;end;end; The WHILE and REPEAT loops Sometimes we wont know exactly how many times a loop should cycle. What if we want to repeat an operation until we reach a specific goal? The most important difference between the while-do loop and the repeat-until loop is that the code of the repeat statement is always executed at least once. The general pattern when we write a repeat (and while) type of loop in Delphi is as follows: repeatbeginstatements;end;until condition true while condition true dobeginstatements;end; Here is the code to show 5 successive message boxes using repeat-until: varj: integer;beginj:0;repeatbeginj : j 1;ShowMessage(Box:IntToStr(j)) ;end;until j 5;end; As you can see, the repeat statement evaluates a condition at the end of the loop (therefore repeat loop is executed for sure at least once). The while statement, on the other hand, evaluates a condition at the beginning of the loop. Since the test is being done at the top, we will usually need to make sure that the condition makes sense before the loop is processed, if this is not true the compiler may decide to remove the loop from the code. var j: integer;beginj:0;while j 5 dobeginj:j1;ShowMessage(Box:IntToStr(j)) ;end;end; Break and Continue The Break and Continue procedures can be used to control the flow of repetitive statements: The Break procedure causes the flow of control to exit a for, while, or repeat statement and continue at the next statement following the loop statement. Continue allows the flow of control to proceed to the next iteration of repeating operation.

E-Business. Classification, Development And Implications Of E-Business Essay

E-Business. Classification, Development And Implications Of E-Business On Modern Organizations - Essay Example The global information infrastructure served as the foundation for new methods of personal interaction, communication, transaction and this has tremendously changed the way people did business. From the mid 1990s, global networking platform grew rapidly until 2000 and has started showing major signs of success stories of many multinational companies by 2003 (Schneider, 2011, p. 4). Within just few years after the mid 1990s, the internet-based business has become a larger part of the total economy. Electronic Business, generally termed as E-business, is one of the most important aspects to emerge from the internet. E-business is more than another way to sustain and improve the traditional business practices. Most of the researchers highlighted the revolutionary aspects of e-business adoption and its positive impacts on human life whereas some others suggested that e-business is a kind of disruptive innovation as it radically changes the traditional way of carrying out business. E-marketing, E-banking, E-learning, E-government etc are other major breakthrough developed with the use of internet technology. This paper provides detailed answers to the questions what is E-business and how does it matter to an organization. Based on relevant literatures, this paper examines the theoretical perspectives of e-business and describes its general impacts to a business organization. This paper will focus on the field of e-marketing and examines how e-marketing is influencing today’ s business and marketing arenas. E-business The terms E-commerce and E-business are often used interchangeably, but they are distinct concepts. E-commerce is a term used to describe the process of transacting business over the internet, but E-business involves the fundamental reengineering of the business model in to the internet-based networked enterprise. More specifically, ecommerce is narrower in the sense that it refers only to the buying and selling of goods or services by using internet technology, whereas E-business accounts for all business activities, including both internal and external, that are conducted online. E-business describes the information system and application using the internet to support and carry out business processes. As Bartels (2000) noted, to be very specific about the difference, E-business includes E-commerce, but also covers organization’s internal activities such as manufacturing, inventory management, financing, human resource management, knowledge management etc. With E-business, companies can link its internal and external activities very effectively to work more closely with different stakeholders such as suppliers, partners, and customers etc to satisfy customers’ needs. Grefen (2010) strongly argued that primarily three criteria are to be met to call a combination of business activities and information technology e-business. These three criteria are: 1- The business activities must be core activities. The activities must be directly related to the reason of the existence of the business. 2- The use of information techn

Financial statements analysis and financial models(question answers) Assignment

Financial statements analysis and financial models(question answers) - Assignment Example a company, without seeking for debt finance, the following are two ways a company can adopt in order to increase the sustainable growth rate: first, the utility rate of assets should be increased in order to increase the revenue generated, thus, increase the net income. An increase in the net income increases both the ROE and the payout ratio. Second, the company can depend on either retained earnings or equity finance to fund the undertakings of projects with positive net present value. ROE = Profit margin*Total asset turnover*equity multiplier = (0.55*1.9*0.063) = 6.5835%. Sustainable growth = (ROE*b)/1- (ROE*b). 0.09 = (0.065835b)/ 1 – (0.065835b). b = 1.2546 = (1 – payout ratio). Therefore, payout ratio = (1.2546 – 1) = 25.46%. Consequently, for the growth rate to be achieved, the dividend payout ratio must be 25.46%. The interpretation means that the company will use 25.46% of the net income to fund dividend payment. The approximate sustainable growth rate SGR = (ROEb)/1- (ROEb). ROE = (Net income/equity) = (95,000/230,000) = 41.30%. The payout ratio = (42,000/95,000) = 44.21%. Therefore, SGR = (0.413*0.4421)/1 – (0.413* 0.4421) = 0.1826/ (1- 0.1826) = 22.34%. The exact sustainable growth rate = 22.339124%. Since the value of equity never changed during the period, the ROE is remains unchanged. Therefore, the approximate sustainable growth rate is similar to the above determined